Victron BlueSolar MPPT 100/50 charge controller

Victron Bluesolar MPPT 100/50

  • $364.85
    Prix unitaire par 
Frais de port calculés à l'étape de paiement.


Victron Bluesolar MPPT 100/50

Maximum Power Point Tracking Upper curve:

Output current (I) of a solar panel as function of output voltage (V).

The Maximum Power Point (MPP) is the point Pmax along the curve where the product I x V reaches its peak.

 

Lower curve:

Output power P = I x V as function of output voltage.

When using a PWM (not MPPT) controller the output voltage of the solar panel will be nearly equal to the voltage of the battery, and will be lower than Vmp.


Ultrafast Maximum Power Point Tracking (MPPT) 

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. 

Advanced Maximum Power  Point Detection in  case of partial  shading conditions

If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP.

The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency

No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F).

Flexible charge algorithm

Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch

(see manual for details).

Extensive electronic protection

Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection.

PV reverse current protection.

Internal  temperature sensor

Compensates absorption and float charge voltage for temperature.

Real-time data display options

-           ColorControl GX or other GX devices:

see the Venus documents on our website.

-           A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.




BlueSolar Charge Controller

MPPT 100/30

MPPT 100/50

Battery voltage

12/24V Auto Select

Rated charge current

30A

50A

Nominal PV power, 12V 1a,b)

440W

700W

Nominal PV power, 24V 1a,b)

880W

1400W

Maximum PV open circuit voltage

100V

100V

Max. PV short circuit current 2)

35A

60A

Maximum efficiency

98%

98%

Self-consumption

12V: 30 mA 24V: 20 mA

Charge voltage 'absorption'

Default setting: 14,4V / 28,8V (adjustable)

Charge voltage 'float'

Default setting: 13,8V / 27,6V (adjustable)

Charge algorithm

multi-stage adaptive

Temperature compensation

-16 mV / °C resp. -32 mV / °C

Protection

Battery reverse polarity (fuse, not user accessible)

PV reverse polarity, Output short circuit, Over temperature

Operating temperature

-30 to +60°C (full rated output up to 40°C)

Humidity

95%, non-condensing

Data communication port

VE.Direct

See the data communication white paper on our website

ENCLOSURE

Colour

Blue (RAL 5012)

Power terminals

13 mm² / AWG6

Protection category

IP43 (electronic components), IP22 (connection area)

Weight

1,3 kg

1,3 kg

Dimensions (h x w x d)

130 x 186 x 70 mm

130 x 186 x 70 mm

STANDARDS

Safety

EN/IEC 62109-1, UL 1741, CSA C22.2

1a) If more PV power is connected, the controller will limit input power. 1b) PV voltage must exceed Vbat + 5V for the controller to start.

Thereafter minimum PV voltage is Vbat + 1V.

2) A PV array with a higher sort circuit current may damage the controller.

spec sheet:

SCC020050200
SCC020050200

SCC020050200

 

Add the VE.Direct Bluetooth Smart dongle for added features!