BE Power - BE10500ITATS, TRI-Fuel 10,500W Generator, 2 Wire Start

SKU: BE10500ITATS

The BE Power BE10500ITATS Tri-Fuel Digital Inverter Generator is a serious off grid workhorse, and an ideal pairing with EG4 inverter systems for automatic backup. Delivering 10,500 peak watts and about 8,400 running watts on gasoline, this unit provides enough clean power for home backup, job sites, RVs or cottage setups, while its digital inverter design keeps output safe for sensitive electronics. 

Tri-Fuel capability lets you run on gasoline, propane or natural gas, so you can choose the fuel that best suits availability, storage, and runtime requirements. The acoustic shell and inverter technology keep noise around 64 dB at 7 meters, significantly quieter than traditional open-frame generators. Weather protected outlets, a built in LED work light, Sub-Zero cold start technology and automatic CO shutdown make it a practical, modern generator ready for Canadian conditions. 

For off grid solar systems, the integrated two wire start and inverter communication capability mean it can be controlled automatically by compatible inverter systems, making it a strong “backup engine” for EG4 based power setups.

  Key Features

• Clean inverter output, ≤3% THD, safe for laptops, medical devices, and AV gear. 
• Tri-Fuel versatility, switch between gasoline, propane, or natural gas to match availability and runtime needs. 
• Dual-voltage output, 120 V or 120/240 V, with L14-30R 30 A and 14-50R 50 Aoutlets for transfer-switch backup or RV panels. 
• Quiet performance around 64 dB @ 7 m, thanks to the sound-dampening enclosure. 
• Cold-weather starting, Sub-Zero technology for reliable winter operation. 
• Engine protection, automatic low-oil shutdown extends engine life. 
• Built to last, 100% copper alternator windings for better efficiency and thermal management. 
• Maintenance-friendly, side service panels, eco mode, battery charge port, and onboard LED work light. 

Why it’s great for

• Home backup with a transfer switch, power fridges, sump pumps, furnace blowers, and essentials. 
• Cottages, RVs, and events, quiet inverter power with dual-voltage flexibility. 
• Jobsites, rugged build with weather-protected outlets and clear status display. 

Outputs and Ports

• (2) 120 V, 20 A duplex GFCI receptacles
• 20/240 V 30 A L14-30R
• 120/240 V 50 A 14-50R, 12 V DC 8 A, grounding terminal, voltage selector 120 V only or 120/240 V. 

What’s Included

• Engine oil

• Oil funnel

• Screwdriver

• LPG hose

• NG hose

• USB A & C adapter

• Lithium-ion battery

• Battery charger

• 2-wire auto start cable

Installation & Care, Quick Tips

• For home backup, use a manual transfer switch installed by a qualified electrician; select the correct voltage mode on the front panel. 
• Operate outdoors in a well-ventilated area; never in enclosed or partially enclosed spaces. The CO detector will shut down the unit if dangerous levels are detected. 
• Use eco mode for lighter loads to save fuel and reduce noise; perform regular oil and air-filter service per the manual. 

SPECS

Peak Output (Gasoline): 10,500 watts

Running Output (Gasoline): 8,400 watts

Rated Wattage: 8,400 watts (Do not exceed rated wattage to prevent overloading and ensure stable operation)

Fuel Types: Tri-fuel (Gasoline, Propane (LPG), Natural Gas)

THD: ≤3 percent

Grounding: Neutral bonded

Engine: PowerEase 458 cc OHV, electric and recoil start, eco mode

Cold Start Capability: Sub-Zero technology

Inverter Type: Digital inverter with clean sine wave output

Eco Mode: Power-saving eco mode for improved efficiency and quieter operation

Alternator Windings: 100 percent copper

Noise Level: 64 dB at 7 m

Fuel Tank Capacity: 26 L (6.8 gal)

Runtime: Approx. 9 hours at 50 percent load (gasoline)

Noise Reduction: Sound-dampening shell

Outlets: Weather-protected

Lighting: Built-in LED floodlight

Safety: Automatic CO detector

Compliance: ETL, EPA, widely listed as CARB compliant

Unit Weight and Size: 238 lb, 23 in x 29 in x 31 in

Boxed Weight and Size: 297 lb, 37 in x 25 in x 32 in